Opel Z13DTJ

The Opel Z13DTJ engine, also known as the LDP, was produced from 2005 to 2011 in a Polish factory and was installed in popular Opel models such as the Agila, Corsa and Meriva. This engine is essentially a variation of the Fiat 199A2000 diesel engine, characterized by its fuel efficiency and durability.

Technical characteristics of the Z13DTJ

Characteristics Value
Exact volume 1248 cm³
Power system Common Rail
Power 75 hp
Torque 170 Nm
Cylinder block Cast-iron R4
Cylinder head Aluminum 16v
Cylinder diameter 69.6 mm
Piston stroke 82 mm
Compression ratio 18
Features Intercooler
Hydrocompensators Yes
Transmission timing Single row chain
Turbocharging Yes
Recommended oil 3.1 liters 5W-30
Environmental class EURO 4
Example service life 350,000 km
Engine weight 140 kg

Application of Z13DTJ engine in Opel models

Opel Z13DTJ

  • Opel Agila B (H08) – 2007-2010
  • Opel Combo C (F06) – 2005-2011
  • Opel Corsa D (S07) – 2006-2010
  • Opel Meriva A (X03) – 2005-2010

Benefits

This engine has gained wide popularity due to its good performance and low fuel consumption. Common Rail system provides high efficiency and smooth operation, and the presence of a turbocharger allows you to develop good dynamics for its volume.

Disadvantages and possible problems of Z13DTJ

  1. Oil consumption – the engine is prone to high oil consumption, especially at high revs, which requires regular oil level checks.
  2. Timing chain – the chain and its tensioner have a limited life, which can lead to overshooting and, if broken, damage to the rockers.
  3. EGR valve – if dirty, it can jam, which leads to engine shutdown immediately after starting.
  4. Soot filter – if it is burned through, diesel fuel may get into the oil, which requires its replacement.
  5. Cooling system – in cold weather there may be problems with the engine management system and crankcase ventilation; also antifreeze may leak from under the thermostat, which is dangerous for engine operation.

Conclusion

Opel Z13DTJ is a reliable engine for everyday use, provided regular maintenance and compliance with the requirements for operation.

Leave a Reply

Your email address will not be published. Required fields are marked *